Whole House Water
Filtration Systems
Family Owned
in Orange County
Call or Text
Installations can be similar, but no two jobs are exactly the same. Our installations are always clean and professional. Take a look at the most common installations below. As always if you have any questions don’t hesitate to reach out to us.
This whole house filter and conditioner was installed in the front right corner of the garage using 1″ copper and 1″ flex hose. The 1/2″ PVC drain was run out to the planter and electrical was plugged in directly behind the system.
This installation was a whole house softener and tankless water heater in an outdoor shed. This complete system was installed using 1″ copper pipe, 1/2″ PVC drain and a dedicated electrical outlet was installed (not provided by AmeriFree).
This whole house filter and conditioner was installed underneath the deck using 1.25″ copper plumbing. There was a dedicated outlet on the wall and drain was routed to an existing drain 15ft away. All systems are protected from the elements.
This installation was installed in the front right corner of the garage using 1″ copper pipe. 1/2″PVC drain line was run through the wall out to the driveway. Electrical was plugged in to an outlet 10 feet away on the middle of the garage wall.
This system was installed on the left side of the home. Main line was 3/4″, 1/2″ PVC drain line was run directly into the planter and electrical was run through the wall into a living room wall outlet.
This whole house filter and softener was installed on the left side of the garage using 1″ copper pipe. 1/2″ PVC drain line was run directly behind the system to the existing drain and electrical was plugged in to a wall outlet directly behind the system as well.
This whole house filter and conditioner was installed in the back left corner of the garage using 1″ copper . The 1/2″ PVC drain was run to an outdoor drain through the wall. Tankless water was installed on back left wall with venting to the outside.
This whole house filter and conditioner was installed in a cabinet inside the garage on the left side. 1.5″ main was outside and we cut the line and brought it into the cabinet. Electrical outlet was available within 3 feet and the 1″ PVC drain was run to the drain.
This whole house filter was installed in the front left corner of the garage. The main line was on the opposite side of the wall. 1/2″ PVC drain was run through the wall to the driveway and the electrical was plugged into a wall outlet near the top of the garage wall.
This installation was installed in the front right corner of the garage using 1″ copper pipe. 1/2″PVC drain line was run through the wall out to the rain gutter drain. Electrical was plugged in to an outlet near the top corner of the garage wall.
These 2″ commercial softeners were installed in a high usage laundry facility. This is a very complex installation, for more information please contact us.
This tankless reverse osmosis was installed under the kitchen on the left side. 1″ faucet hole was drilled to the left of the homeowners existing faucet. Electrical was plugged in to the existing outlet under the sink.